main image


1500W SDS Plus Drill



  • Drill, hammer drill & roto-stop chisel modes
  • SDS Plus & standard 13mm chucks
  • Variable speed & built-in safety clutch
  • Drilling capacities: wood 40mm, masonry 32mm, steel 13mm
  • Separate keyed chuck, accessory pack & blow-moulded case

Buy Online cart Logo
Find a Dealer location Logo
Review this Product location Logo
4.47 out of 5 stars
15 review(s)
Silverline Guarantee

Product Specification

IP Rating IP20
Power 1500W
Impact Force 5.5J
Blows/Impacts Per Minute 0 - 4350bpm
No Load Speed 0 - 880rpm
Chuck Size 0 - 13mm
Chuck Type SDS Plus
Variable Speed Yes
Drilling Capacity - Maximum in Wood Ø40mm
Drilling Capacity - Maximum in Steel Ø13mm
Product Weight 5.5kg


Key Features

SDS Plus Drills have been developed over the years to become the rugged, heavy duty tools that they are today. The term 'SDS' originated from the German phrase "steck, dreh, sitzt", which translates in English to "insert, twist, fits".

This chuck system clamps the bits tightly, preventing them from working loose and becoming damaged or snapping.

The Silverstorm SDS Plus Drill is powered by a gutsy 1500W motor, specially designed to drill into and chip away masonry when the hammer action is engaged. Needless to say; if it can drill masonry then it works effortlessly on wood and metal, this time in standard drilling mode when using the supplied 13mm chuck. A chiselling action is accomplished through a flick of a switch which, when activated, allows the user to chip away at materials with a motorised version of a hand chisel and hammer.

With 5.5kg of weight helping to produce the 5.5J of power, this Silverstorm tool won't shirk a challenge. No load speed is variable between 0-880rpm and the hammer action produces up to 4350ipm, while the built-in safety clutch prevents damage to the bits and workpiece, as well as injury to the user.

Compatible with all masonry bits, points and chisels with an SDS Plus fitting, including Silverline 930164 and 633750. The Silverstorm SDS Plus Drill is supplied with an array of accessories including 3 x masonry bits (8, 10 & 12mm), 1 x chisel, 1 x point, a 13mm keyed chuck, dust guard and blow-moulded carry case.

Box Contents

  • 1 x SDS Plus Drill 1500W
  • 1 x Keyed chuck
  • 1 x SDS plus point chisel
  • 1 x SDS plus flat chisel
  • 3 x SDS plus drill bits (8, 10, 12mm)
  • 1 x Chuck key
  • 1 x Pot of grease
  • 1 x Dust guard
  • 1 x Instruction manual

Customer Ratings

By: Derek G

22 May 2017

I bought this SDS drill for its power, I found I sometimes struggled using an 800W SDS drill with Diamond Core Drill, especially using 107mm, 117mm, and 127mm core drills. This 1500W has the power to drill any hole. It is fine for breaking up screen floors and breaking down brick wall. This 1500W SDS plus drill will save me lots of time and money. D. Guy

By: Michael R

13 March 2017

I recently purchased the Silverstorm 1500w SDS Plus Drill as my Makita SDS was a little out dated/under powered. As my previous drill was three times the price of the Silverstorm one I did not hold much faith for the Silverstorm. How wrong I was, this drill performs every task I throw at it, whether it be chiseling through 4 inch thick concrete or drilling out 14mm holes for anchor bolts into masonry. I would strongly recommend this drill to anyone who requires the use of such a drill. I will most definitely be purchasing more Silverstorm tools in the future after this experience!

By: Lee P

02 March 2017

I bought this for a house renovation, I had to remove plaster and render from all the walls for insulation, I already have a Bosch hammer sds and needed a one job drill so my son could help me.The chisel action on this is much better than my Bosch, what a suprise! I have finished all the walls and its still going strong. the only down side to this drill is that when you drill using the hammer action is it spins too quick for the hammer to work properly so you have to turn the speed down a notch or two, oh dear never mind! all in all a brilliant drill for the money and three years guarantee.

By: Peder P

19 September 2016

So far very satisfied !

By: Ross S

13 September 2016

I am an electrician with 20 years experience and decided to buy a cheaper drill when my bosch breaker blew up, this drill is every bit as good as that one at a fraction of the cost!!!! it''s solid and packs a real punch when chasing , would definitely recommend for tradespeople on a budget !!

By: james h

12 September 2016

purchased this sds drill to use hammer chisel to remove floor tiles. this is a good drill does the job with ease, did not run it continusely allowed to cool for a few minutes. would be good if it had a boulster chisel.

By: Richard D

12 September 2016

I''ve use my Silverstorm 1500W SDS now several times and found it to be a perfect tool for my requirements. It chops through brickwork, chases out really well and is great at removing old plaster. Also handy for those drilling jobs that require a bit more power.

By: Alastair P

12 September 2016

So far I''ve used this drill for lots of different jobs - from a 6-inch extractor fan hole to drilling holes in mortar to breaking out chunks of concrete in preparation for a door. No problems at all; drill just keeps on going :) Only minor gripe is the lack of a fixed position hammer mode (which would have been useful when I was chipping up floor tiles). Not the end of the world, though - especially for the price.

By: Jason P

08 August 2016

Excellent tool. Since purchased used at least twice a week

By: Mariusz

08 August 2016

this drill prefect job

By: Christopher J

29 October 2017

Good for money

By: Adrian D

04 February 2017

Had one of these before but from another make. Unfortunately it and most of my stuff were destroyed in a flood. Good little cheap work horse, does what it says in the box, you get what you pay for.

By: Melvyn j

12 September 2016


By: Phil t

08 August 2016

Very good valve, it got me out of trouble when I needed to drill some concrete and knock down a wall. For the price I think it was great!!

By: Keith D

16 November 2016

Hope this is more reliable than previous model which burnt out after only three 12mm dia holes. Silverline not interested.

3 Year Guarantee

This Silverline 1500W SDS Plus Drill is guaranteed for a period of 30 days from date of purchase against a fault developing in either the materials or the workmanship during manufacture. You can register for your 3 Year guarantee by registering your product online. Any faulty goods will be repaired or replaced free of charge.

Related Products
  • 633821
  • 263570
  • 129901
  • 126898
  • 593128