244980

Roedora neumática

€ 54.48 IVA no incluido

Regulador de potencia integrado
Palanca de control manual para mayor control
Corta chapas de acero de hasta 1,2 mm de grosor (calibre 18)
No provoca quemaduras ni deformaciones
Incluye conector rápido de 1/4" para Reino Unido y Europa

Comprar online cart Logo

Buscar un distribuidor location Logo

Comentar este producto review Logo

4 de 5 estrellas

10 comentarios

Características técnicas

Consumo de aire	112 l/min (4 cfm)
Tamaño del conector	BSP 1/4"
Acabado	Pulido
Acabado - Empuñadura principal	Pulido
Peso	0,839 kg
Velocidad variable	Sí

Videos y manuales

Descargar manual en formato PDF

Descripción del producto

Palanca de control manual para mayor control. Corta chapas de acero de hasta 1,2 mm (calibre 18) sin provocar quemaduras o deformaciones. Incluye un regulador de potencia y conector rápido de 1/4" para Reino Unido y Europa. Velocidad sin carga: 1.800 min-1. Consumo de aire: 112 l/min (4 cfm).

Contenido en el embalaje

Roedora neumática 190 mm
Conector rápido EN-6 para Reino Unido
Conector rápido EN-4 para Europa
Terraja
Manual de instrucciones

Comentarios realizados por nuestros clientes

Por: mario c

2019-05-14T00:00:00

Great little nibbler...Cuts through 18ga steel like butter!!!! Great customer service by Silverline too!! I am thinking of buying a second one for my lodge. 9.5/10!!

Por: Mario C

2019-05-07T00:00:00

Bought this nibbler for home use in my garage. Cuts through 18 gauge steel like cutting through butter with a hot knife. Easy maintenance (or almost none)....and works well with my 13 gallon compressor!!!

Por: Connor

2019-04-27T00:00:00

What a great tool this little air nibbler is! Made cutting out excess shelf metal for a speaker install a 5 minute job! Can see myself using this tool on my upcoming rear arch refurb to!

Por: LAURENT D

2018-05-04T00:00:00

Super produit de qualité

Por: Dennis C

2017-09-26T00:00:00

Good tool, does what it says, a bit air hungry as are most air tools for those of us with diy compressors, but it does work fine no complaints...................

Por: Andy L

2017-03-18T00:00:00

Does exactly what it says on the box !! Lightweight , accurate, great value for money

Por: Graeme l

2017-03-13T00:00:00

The nibbler is a very nice tool to use light and easy to use cuts what you want it to and very quick had no problems made my life and job a lot easier would recomend it to anyone

Por: Richard T

2017-02-15T00:00:00

Seems to do Job ok easy enough to free if jams replacement bits cheap enough

Por: Yann

2016-10-10T00:00:00

Très content de cette grignoteuse, elle fait bien le travail qu''''on lui demande tant que l''''on ne lui demande pas de couper de la tôle trop épaisse (mais c''''est annoncé dans la description). Elle m''''a permis de refaire les planchers de ma 2cv :)

Por: Mike G

2016-08-16T00:00:00

I have used the air nibbler several times on different thicknesses of metal and it has cut without issue. I am a home diy/mechanic and have needed it to cut plates for welding, much easier than the hacksaw and easy to cut along a line and fantastic at awkward curvy shapes which the hacksaw could not do and I would need to spend hours grinding or filing. I have found the nibbler to easier than using tin snips as again they mainly are ok with straight lines,

Garantía 3 años

Este producto Silverline Roedora neumática dispone de 30 días de garantía desde la fecha de compra contra defectos de fabricación y materiales defectuosos. Registre su producto online para extender el periodo de garantía 3 años. Todas las piezas defectuosas serán reparadas de forma gratuita.

Los clientes interesados en este producto, también han visto...

675079
793750
598446
672976
456932

Descargar manual en formato PDF