main image


Plantilla para el fresado de encimeras

900 mm

€ 56.08 IVA no incluido

  • Profundidad 12 mm
  • Cortes hacia la izquierda y hacia la derecha y juntas en esquinas
  • Incluye pasadores e instrucciones
  • Requiere fresa de 12,7 mm y casquillo copiador con diámetro externo de 30 mm
  • Para utilizar en encimeras de 900 mm

Comentar este producto review Logo
4 de 5 estrellas
21 comentarios

Características técnicas

Peso 3,67 kg
Grosor 12,5 mm

Descripción del producto

Plantilla para fresar encimeras de hasta 900 mm de grosor. Para trabajar con fresadora manual, permite el corte y fresado para ingletar tableros en DM y aglomerado. Requiere casquillo copiador con diámetro externo de 30 mm. Fabricada en fibra de madera. Incluye manual de instrucciones y pasador de alineación.

Contenido en el embalaje

  • Plantilla para el fresado de encimeras
  • 4 pasadores de alineación
  • Manual de instrucciones

Comentarios realizados por nuestros clientes

Por: Hobline


Mit ein bisschen Übung und Ruhe bekommt man super Ergebnisse mit der Schablone hin. Funktioniert auch bei Ikea APL. Man sollte unter die Schablone Antirutschstreifen kleben, da die Schablone zum rutschen neigt. Auf jeden Fall zu empfehlen zumal für den Preis top

Por: Chris C


Very easy to use , instructions where clear and the results where very good.

Por: Russ


A fab piece of kit. Made a daunting job very very easy. Great results as always from Silverline.

Por: Jeremy


Far too much flex especially once you get to do the cut on a female/male joint. Does not give you any confidence that you can produce good results.

Por: Ian G


Great piece of kit for the price, won''t last forever, but I don''t need it for ever, although it does come with a lifetime warranty. Recommend it for people who don''t regularly fit kitchen, as you could get fleased for something you might only use once. Bonus that it came with the appropriate router bits for the job.

Por: trevor w


arrived quickly,easy to use,will last for many more cuts if needed,many thanks.

Por: William w


Purchased the silverline 900 jig I was fitting a u shape worktops which involves 4 mitres in total every miter was spot on great jig at half the price

Por: Brian K


The jig works fine. Gives a professional finish to worktop joints. You do need to measure and mark accurately.

Por: Simon R


Ich habe die Frässchablone bei Amazon Deutschland gekauft und erfolgreich eingesetzt. Allerdings musste ich noch eine 30er Kopierhülse und einen Fräser mit 12,7mm Durchmesser kaufen. Wäre super, wenn es die Schablone auch für andere Durchmesser geben würde. Das Fräsergebnis wurde nur zu 99% perfekt. Der minimale Fehler fällt aber nicht auf und kann auch an der fehlenden Übung im Umgang mit der Schablone gelegen haben. Die Fixierstifte könnten aus Metall sein. Für den Preis aber absolut i.O., deshalb auch 5 Sterne.

Por: P.Rodgers


Very easy to use with quality instructions.Highly recommended.

Por: lewis c


I found the jig is great, nice and precise cut outs for the pegs to fit snugly in, nice detailed instruction manual....But as the jig is laminated mdf I do find it flexes quite easily on certain cuts meaning the cut isn''t perfectly 90 degrees to the worktop. Id suggest future versions following other manufacturer''s and using laminated ply for a stronger jig :)

Por: Michael S


Ich habe diese Schablone gekauft, da meine Frau eine neue Arbeitsplatte für die Küche wollte. Ich habe die Schablone mit der Oberfräse von Silverline benutzt. Natürlich habe ich erst an einem Probestück die Fräsungen geübt. Danach an der richtigen Arbeitsplatte kein Problem. Alles passt super. Genutzt habe ich den Originalfräser von Silverline (12,7mm/12mm Schaft)

Por: Martin


Got this cos it was more cost effective than the worktop people wanted for cutting one joint, which was £50, or £85 for cutting two joints. Did a couple of test cuts as I hadn''t used one of these before. Tests went okay and the "real" cuts went just as well. Every home should have one

Por: Shaun R


This is a geat tool...accurate joints and great quality

Por: John


A good piece of kit at the right price. It worked well and did exactly what I wanted. It is sometimes sold as as a "Single use / job tool" but I have cut three pairs of joints with it and it is as good as new. My only criticism is that the dog bone slots could be a little longer as you have to start your cut with a plunge.

Por: Anuj M


Loved it supper easy to use and easy to understand instruction booklet.

Por: Tom D


The quality of the jig is sturdy and the pegs supplied are a neet fit for positioning the jig. The instructions are helpful and OK following. There was one error in the booklet when cutting the bolt slots but once I spotted it I managed to sort the cut. The range of sizes of work tops able to be cut is impressive by moving a few pegs. The finished cut is excellent and a very clean cut. Completed a few cuts now and every one is excellent. I''ve not tried the curved cuts as yet but with the quality of the miter joints I don''t anticipate any issues. Well pleased with the finish and a worthwhile investment in a good product.



The only one defect was the packaging, when I have open it the jig was cracked. Very sad.

Por: John M


Quality piece of kit, perhaps not so much for the professionals. What I mean by this is the jig is very accurate and very easy to use. A joy in fact to use but not robust enough for everyday stresses and strains the pro''s would subject it to. It was worth every penny for the smile it put on my face as I admired my corner joints, Pro finish from a DIYer. Biggest tip I can give to prolong it''s life is obvious really, let the router stop spinning before removing it. Job done.

Por: Brian J


this is an excellent piece of kit, and makes finishing worktops with perfect joints, a doddle. Just a shame you only use it once.

Por: Paul R


This item is very well made and easy to use. As a keen DIYer the instuctions are easy to follow even if never used before. Totaly recommend for anyone who likes DIY.

Garantía de por vida

Este producto Silverline Plantilla para el fresado de encimeras dispone de 30 días de garantía desde la fecha de compra contra defectos de fabricación y materiales defectuosos. Registre su producto online para extender el periodo de garantía de por vida. Todas las piezas defectuosas serán reparadas de forma gratuita.

Los clientes interesados en este producto, también han visto...
  • 277240
  • 250589
  • 124799
  • 264895
  • 660430