868698

Horca para cavar de acero inoxidable

1.000 mm

€ 31.56 IVA no incluido

Punta y junta de acero inoxidable con acabado pulido espejo
Resistente a la corrosión y baja adhesión a la tierra
Mango de acero con revestimiento de polipropileno y empuñadura cerrada
Indicada para cavar, cultivar y preparación de tierra
Dimensiones de la punta (L x An): 280 x 180 mm

Comprar online cart Logo

Buscar un distribuidor location Logo

Comentar este producto review Logo

2 de 5 estrellas

2 comentarios

Características técnicas

Tamaño de la hoja/disco	280 x 185 mm
Acabado	Pulido espejo
Acabado - Empuñadura principal	Natural
Peso	2,26 kg
Método de construcción	Prensado, soldado, endurecido, templado y remachado

Descripción del producto

Horca para cavar con punta y junta de acero inoxidable con acabado pulido espejo. Resistente a la corrosión y baja adhesión a la tierra. Mango de acero con revestimiento de polipropileno y empuñadura cerrada. Indicada para cavar, cultivar y preparación de tierra. Dimensiones de la punta (L x An): 280 x 180 mm.

Contenido en el embalaje

Horca para cavar de acero inoxidable

Comentarios realizados por nuestros clientes

Por: Peter W

2020-06-15T00:00:00

I was looking to replace my garden fork with something sturdy that wouldn’t get bent tines, so I picked this one. However, it’s poorly designed and I wouldn’t recommend it. • The fork head isn’t wide enough, being narrower by a couple of centimetres than my old fork. • The steel stem joins the head with an angled buttress on each side, which makes the shoulders of the head narrow, and, coupled with the first point, means that I can’t get my foot onto the shoulder. My old fork had a shoulder about 10cm wide, but this one is only half that. • The tines are square section from shoulder to their end, with no tapering. At the end the section is flattened and gives a chisel end. A digging fork ought to have tapered tines with a round section, ending in a point. I couldn’t get this fork to go into some hard ground, but could with my old one. • The steel stem is joined to the plastic handle about half-way down the fork, but it’s not a smooth transition. For some reason there is a small gap which is filled with a plastic ring, and which protrudes, and as I’m used to the shaft moving through my hand smoothly this is annoying. On this fork the ring didn’t sit flush, due to steel debris in the gap it was supposed to occupy.

Por: John P

2017-04-28T00:00:00

I bought a set of fork and spade, buying the stainless steel thinking it would be better quality. Spade ok if a little flimsy compared to my old steel one. Unfortunately the fork lost a prong within a few months of light use so not good.

Garantía de por vida

Este producto Silverline Horca para cavar de acero inoxidable dispone de 30 días de garantía desde la fecha de compra contra defectos de fabricación y materiales defectuosos. Registre su producto online para extender el periodo de garantía de por vida. Todas las piezas defectuosas serán reparadas de forma gratuita.

Los clientes interesados en este producto, también han visto...

675067
427524
595766
630035
868763