main image


350 W tafel band- en schijfschuurmachine, 390 mm

350 W

€ 110,64 

  • 390 x 125 mm dubbele positie Multi-hoek tafel met verstekgeleider
  • Bandschuurmachine met een 0-90° kantelhoek
  • Duurzame inductiemotor met gezegelde lagers
  • 390 mm lange schuurband en 150 mm dia. schuurschijf
  • Inclusief 80 korrel klittenband schuurvel en schuurschijf, Multi-hoek schuurtafel en verstekgeleider

Beoordeel dit product review Logo
3 uit 5 sterren
11 review(s)

Product specificaties

Afwerking Geverfd metaal
Vermogen 350 W
Waardering IP20
Schuurband afmeting 914 x 100 mm, 915 x 100 mm
Schuurschijf formaat 150 mm
Onbelaste snelheid 1450 min-1
Gewicht 14,6 kg
Tafel afmetingen 390 x 125 mm
Schuurschijf diameter 914 mm
Max. werktijd 30 minuten
Werkcyclus S2 30 minuten (korte bedrijfstijd)


Product beschrijving

Bank-gemonteerde combinatie band en 150 mm schijf schuurmachine. Duurzame inductiemotor met gezegelde lagers. Dubbele stofpoort. Dubbele positie Multi-hoek tafel met verstekgeleider. Bandschuurmachine met een 0-90° kantelhoek. Stof-beschermde schakelaar en rubberen voeten. Geschikt voor algemeen schuurwerk op verschillende materialen waaronder metaal, hout en plastic. 915 x 100 mm schuurband met 390 mm lang schuuroppervlak. Onbelaste snelheid: 1450 min-1 (schuurschijf), 5 m/s (schuurband). Voorzien van 80 korrelmaat klittenband schuurvel en schuurschijf, Multi-hoek schuurtafel en verstekgeleider.

Doos inhoud

  • 1 x tafel band en schijf schuurmachine

Klanten reviews

Door: James oneill


Its exactly what i was looking well worth the price would recomend this

Door: Andre Stapelberg


Very solid and enough power for DIY use.

Door: Van Leiper


A. dd to my previous review. The disc guard proved to be too flimsy it cracked in two places when fitting and the holes did not seem to be correct. To get the disc to run true was a major headache and it was impossible to fasten it securely with the guard in place. In the end I threw the guard in the bin. Again only minus stars

Door: Van Leiper


Who designed this junk? To change a belt. like a major overhaul requiring three sizes of screwdrivers and a 10mm spanner? My previous machine needed one Allen key and three minutes of my time, this one has taken me ten minutes without replacing the covers!!!! The switch unit is very conveniently placed on the left end where you have to reach around a spinning disc to operate it or have the belt spinning toward you and throwing muck in your face! I seriously hope it blows up soon so that I can throw it away in cold blood. Star rating? Minus six.

Door: brian ewins


simple pictorial assembly instructions are clear and easy to follow to get the machine up and running. The belt sander work/rest stop needed a bit of manual '' adjustment'' to get it straight and in line , apart from that a good, well made semi-pro machine.

Door: Simon Chapman


I was initially impressed by the product but during setup It became apparent that one of the plastic guards didn''t fit correctly at factory and had been re drilled to force it. This evidently cracked the part in two places. Not wanting to send the whole unit back for a small plastic part, I contacted Silverline through the website to request a part. More than a week later, no reply. Worse still I cant find any phone numbers to chase it up. Having used the machine for two minutes, a loud clunking noise was heard that physically made the machine jump once per rotation. Having investigated it, either the motor is misaligned for the whole cast iron chassis is bent. This is probably the root cause of why the plastic spark guard didn''t fit in the first place. Either way completely unusable. Its going back for a refund.

Door: Owen Henwood


Very good tool that is good for the finishing touches on the fabrication work of my projects. A low affordable price that makes it a very competitive machine.

Door: Ian Holt


I found the assembly instructions were not easy to follow. I am an engineer and following drawings is my business so it should have been easy. The fitting of the disc to the shaft is poor as the disc runs out of true because the bore is oversize and maybe not even at 90 deg to the face. In general the disc is a very poor fit. The remainder of the machine seems to be good.

Door: nigel carf


It does exactly what it says on the box. My only criticism is that the extraction connection is a bit awkward to fit in to a standard extraction flexible pipe.

Door: John Howsego


Not very good! Poor fitting parts, inaccurate table tilt / angle guide.
  • customer contacted

Door: Walter Rinaldi-Butcher


Very pleasing and efficient piece of equipment

3 jaar Garantie

Dit product is voorzien van 30 dagen garantie vanaf de aankoopdatum, tegen materiaal- en vakmanschapfouten tijdens de productie. U kunt uw product online registreren voor het verlengen van de garantie. Defecte machines worden vrij van kosten gerepareerd of vervangen.

Gerelateerde producten
  • 344944
  • 612519
  • 441563
  • 262212
  • 460793