282577
Zestaw spiralnych wierteł do metalu HSS-R, 170 szt.
170 szt.
€ 81.36 BEZ VAT
- Kute wiertła ze stali szybkotnącej HSS-R 4241
- Zgodne według normy DIN388 z 118° punktem
- Rozmiar metryczny15 x 1 i 1.5mm; 10 x 2, 2.5, 3, 3.2, 3.5, 4, 4.5, 5
- 5 x 6.5, 7, 7.5, 8, 8.5, 9, 9.5 oraz 10 mm
- Rozmiar imperialny: 10 x 1/8"
Dane techniczne
Wykończenie | Oksydowane na czarno, powłoka odporna na rdzewienie |
Hartowane | Tak |
Waga | 2,495 kg |
Metoda konstrukcji | Kute matrycowo |
Kluczowe funkcje
Kute matrycowo wiertła ze stali szybkotnącej wyprodukowane z materiału HSS-R 4241, zgodne z normą DIN338 z 118° punktem. W zestawie: 15 x 1 i 1,5mm; 10 x 2; 2,5;3; 3,2; 3,5; 4; 4,5; 5 i 6 mm; 5 x 6,5; 7; 7,5; 8; 8,5; 9; 9,5 i 10 mm; oraz imperialne: 10 x 1/8". Wszystko w wytrzymałej aluminiowej walizce narzędziowej.
Zawartość pudełka
- 1 x Aluminiowa kasetka
- 15 x 1 mm Wiertło HSS
- 15 x 1,5 mm Wiertło HSS
- 10 x 2 mm Wiertło HSS
- 10 x 2,5 mm Wiertło HSS
- 10 x 3 mm Wiertło HSS
- 10 x 3,2 mm Wiertło HSS
- 10 x 3,5 mm Wiertło HSS
- 10 x 4 mm Wiertło HSS
- 10 x 4,5 mm Wiertło HSS
- 10 x 5 mm Wiertło HSS
- 10 x 6 mm Wiertło HSS
- 5 x 6,5 mm Wiertło HSS
- 5 x 7 mm Wiertło HSS
- 5 x 7,5 mm Wiertło HSS
- 5 x 8 mm Wiertło HSS
- 5 x 8,5 mm Wiertło HSS
- 5 x 9 mm Wiertło HSS
- 5 x 9,5 mm Wiertło HSS
- 5 x 10 mm Wiertło HSS
- 10 x 1/8" Wiertło HSS
Oceny klientów
Przez totalguy
2018-09-07T00:00:00
I have not used these a lot yet but ive used some on my drill press and so far they seem pretty good. used with enough lubrication and also taking your time these drill through 3mm steel pretty easily. you have to be sure to keep the tip lubricated and remember to stop and start during the process so as not to overheat the drill bit. im not sure how much punishment these can take but its better to look after your drill bits rather than go at it hard and fast and end up with them snapped or blunt.