main image


Stół warsztatowy z pionową szczęką i współbieżnymi zaciskami

150 kg

€ 42.83 BEZ VAT

  • Stabilna prostokątna stalowa konstrukcja
  • Maks. obciążenie 150 kg
  • Szczęki ustawiane w 3 pozycjach: 0°, 45° lub 90°
  • Dwa blaty (szczęki) robocze o wymiarach 605 x 120 mm

Zrecenzuj ten produkt review Logo
3 z 5 gwiazdek
12 recenzji

Dane techniczne

Maksymalne obciążenie 150 kg
Wykończenie Malowana proszkowo stal
Wykończenie rękojeści głównej Plastik
Waga 6,34 kg

Instrukcje obsługi

Kluczowe funkcje

Stabilna prostokątna stalowa konstrukcja. Duża powierzchnia robocza przez połączenie 2 szczęk w rozmiarze 605 x 120 mm. Szczęki ustawiane w 3 pozycjach: 0°, 45° lub 90°. Maks. obciążenie 150 kg. Wymaga montażu.

Zawartość pudełka

  • 1 x Stół warsztatowy z pionową szczęką i współbieżnymi zaciskami

Oceny klientów

Przez Philip w


I purchased a TB05 heavy duty workmate, on receipt there were at least ,10 areas where the laminate was chipped,on removing the Dogs more laminate chipped off,the jaws bend or move apart when you lift your job off the metal base, you can''t put anything in the end as jaws won''t hold tight,very very disappointed in item

Przez Paul M


Very good value for money, would recommend

Przez Paul M


Good performance for the price quite lightweight

Przez Shaun S


The workbench I received is sub standard at best and potentially dangerous and not fit for purpose. One of the pre assembled adjusting screws (the devices which move the working surface) had a nut which was not fully tightened. This nut secures the screw device to the bracket which holds the working surface. Because this nut is not fully tightened the working surface lifts up and the work piece becomes uneven and loose. It is impossible to access the nut to tighten it further. I cannot use this workbench for the purpose it is designed

Przez Shaun S


When I used the workbench I discovered that one of the nuts on the screw bracket was not fully tightened. As part of a pre assembly it was impossible to access the nut to tighten properly. The consequence of this untightened nut is that the surface board on which you place the work piece raises up on one side when tightened. The outcome is as follows - the work piece is not level and also not secured tightly because it is at an angle and does not have a flat surface to sit on. I cannot effectively use this tool.

Przez David


Rock solid workbench Assembly instructions could have been a little clearer, but for the money no compliant

Przez Oz P


I''m very happy with this product. It went together extremely well - I have seen many reviews in various places saying that the instructions could be clearer but to be honest they were perfectly fine and no worse than anything you would get with a piece of IKEA furniture. It does everything I could ask of it, and the frame is certainly robust enough that I could see it lasting a long time. However the top is MDF and I imagine I''ll be replacing that pretty soon.

Przez Martin W


Workbench is an excellent product for the price

Przez Owen


There are a few choices out there but it came down the this one because the quality is good and value for money is spot on and its light to carry and it has 150 kg load rating to top if off.

Przez B c


Easy to assemble but should have nylon nuts on the m6 bolts to stop them vibrating off when using vibrating power tools

Przez robin s



Przez Chauvet J


Bon produit facile a monté et très simple d''''utilisation. Je le recommande sans réserve

Dożywotnia gwarancja

Silverline Stół warsztatowy z pionową szczęką i współbieżnymi zaciskami oferuje 30 dniową gwarancję począwszy od daty zakupu, pokrywając szkody spowodowane wadliwym materiałem bądź wadą produkcyjną. Ponadto rejestrując produkt online otrzymają Państwo Dożywotnia gwarancję.

Podobne produkty
  • TB01
  • TB02
  • 129984
  • 226168
  • 427611