Česká republika
Deutschland
España
France
Nederland
Polska
United Kingdom
Canada
262212
Trapano a colonna 350 W
350 W
€ 102.00 IVA ESCLUSA
- Cinghia di trasmissione a 5 marce
- Profondità massima di perforazione a 50 mm
- Capacità del mandrino con chiave 13 mm
- Corsa mandrino (profondità di foratura) 0 - 50 mm con manometro
- Per i lavori di perforazione in cui è richiesto un alto grado di precisione
Caratteristiche prodotto
| Tipo di mandrino | Con chiave |
| Velocità a vuoto | 580 - 2.650 giri/min. |
| Peso prodotto | 14,5 kg |
| Dimensioni Banco | 160 x 160 mm |
| Velocità variabile | Si |
| Dimensioni mandrino | 13 mm |
Caratteristiche chiave
Cinghia di trasmissione a 5 marce. Corsa mandrino 0-50 mm con manometro per una foratura precisa. Solida base e banco della macchina. Capacità del mandrino con chiave 13 mm.
Contenuto della scatola
- 1 x Trapano a colonna 350 W
- 1 x Supporto a colonna centrale
- 1 x Superficie di lavoro regolabile
- 1 x Placca di base
- 1 x Guardia di sicurezza
- 1 x Mandrino 13 mm
- 1 x Chiave mandrino
- 3 x Dadi M8
- 3 x Rondelle elastiche M8
- 3 x Impugnature 133 mm
- 1 x Chiave esagonale (M4)
- 1 x Manuale di istruzioni
Valutazioni da parte dei clienti
da Graeme G
2019-11-05T00:00:00
Previously iv''e purchased saw blades or sanding disks and various sized belts over the years and all have worked well . Iv''e wanted a drill press for a while and come across the Silverline 350w . I read the reviews and already trusting in the Silverline products i purchased my very first drill press . It has been a great little addition to my small workshop . Very quiet and the power is every thing i need from making wooden toys and various size furniture .
da Mark H
2019-09-24T00:00:00
My brother is a time served engineer who went back into education and worked his way up to a PhD. He was very impressed with the accuracy of this drill press. It is phenomenal for the price.
All the negative comments on the internet come from people who have either never been near the drill or they didn’t set the drill up right as per very clear instructions. I have drilled everything from glass to 5mm steel with no problem at all.
The drill is never underpowered and I''ve never found a need for more gears. I''ll be honest I didn’t check whether the table was of the ratchet and handle variety, but now I’m glad it isn’t. It seems those handles get in the way. When I was building my woodwork bench I was drilling 12mm holes through 90mm wood simply by raising and lowering my table whilst the drill was in situ after the first 50mm. I don’t think this would have been possible with a ratchet style table. It’s also much more difficult to build a woodworking jig for that style.
My drill has had a significant amount of use over the last year, and I couldn’t have been happier.
da Artur
2019-04-12T00:00:00
For this price, like with all the other Silverline power tools, it''s perfect. Hard to tell how durable it is but it''s definitely balanced well between the cost and DIY user needs. Worth the money, no regrets.
da Mark H
2019-03-30T00:00:00
A very reliable, accurate drill press with no noticeable run out. Definitely punches above it’s weight price wise. I use mine mainly for wood and the speed range is perfect for me. I have mine bolted to my workbench and there’s very little vibration and no noise to disturb the neighbours. I would recommend this drill press without reservation.
da Harry
2018-12-28T00:00:00
Very good product and fast delivery
da Peter N
2018-11-09T00:00:00
Excellent value for money. The drill comes well packed and is very easy to assemble.
The operation of the motor is quiet and smooth. I have had no problem using this drill to date and can’t fault it.
da william a
2018-07-19T00:00:00
great value for such a useful tool
da Cesar B
2018-06-10T00:00:00
Todo funciona perfectamente hasta ahora. Cumple mis espectativas
da kb
2017-10-04T00:00:00
I originally bought a clarke drill, but took it back when i realized this was essentially the same but £30 cheaper, Very happy with my Silverline version, there is no play or wobble in the chuck spindle (like some early versions). i was actually expecting the motor/gear pulleys to be a black plastic as seen in some stock photos, but was pleased to find that like the more expensive brand they were also machined from aluminium. This model also has the 350w Induction motor not just the standard fan cooled motor found in some versions of this drill.
The only weakness i found was the depth stop / guard - too flimsy, however i plan to replace this with a home made one.
da Keith F
2017-05-09T00:00:00
Purchased as a replacement for a gigantic 60 year old drill press which took much of my work space. Easy to assemble with basic tools. For the limited DIY jobs I do it works just as well as the old one. Very good value for money an I wold recommend to any DIY''er.
da M C
2017-02-16T00:00:00
Good all purpose bench drill.Value for money.
da Ross D
2017-01-22T00:00:00
Has been a good choice in product, although I would suggest you don''''t don''''t use plastic for the depth gauge holder and the cut off switch as mine arrived smashed and had to make new metal parts.
da Alfonso
2016-12-17T00:00:00
Tengo la correa muy gastada y no la encuentro por ningún lado en donde puedo comprarla
da Steve
2016-11-28T00:00:00
So I have needed to get a drill press for ages as there is just no way to drill dead accurate by hand. I didnt want to spend loads or have the footprint for a massive floor standing unit. This compact bench top drill press is just the job. Yes its fairly basic in terms of variable speed you have to change the drive belt onto different ration pulleys but that is sound engineering that wont go wrong. The thing is straight level and stable and does what it needs to. For the price its an absolute bargain.
da Milo S
2016-11-08T00:00:00
For most cases where a cordless drill can''''t do the job the drill press is more accurate. It''''s steady and I can use it for more purposes than I intended to. The rest plate can even be tilted, which is great for angle drilling. An affordable must have for the bench top. I use it for drilling holes in plates for amplifier chassis and wooden pin blocks of small instruments.
da Allen M
2016-10-06T00:00:00
well pleased with this product
da Richard M
2016-09-29T00:00:00
Wonderful machine for hobby work. Not had long enough to do any heavy work, but so far would recommend this drill to anyone.
da Phillip c
2016-09-27T00:00:00
First class item would recommend this product to any one
da Peter R
2016-09-13T00:00:00
For its price this drill has proved excellent for my usage.
da Pat N
2016-09-13T00:00:00
Really pleased with drill press. Well worth the money, can''t fault it at all. An extremely good buy.
da Geoge H
2016-09-13T00:00:00
Great value for money
da Ian H
2016-09-12T00:00:00
A good value for money drill and easy to assemble. It is ideal for hobbyists who want a good quality machine for a very reasonable price,
da Jay
2016-09-12T00:00:00
Easily assembled and worked well from day one. Bought two years ago and continues to work without issue. None of the faults recorded by others manifested themselves and I recommend this product. Great value.
da Allen M
2016-09-12T00:00:00
Very good product needed a new drill as my old one was broken, this is just as good as the expensive drill I had before.
da S J
2016-09-12T00:00:00
Fantastic equipment , does the job it made for.
da Paul P
2016-09-12T00:00:00
The drill is all I expected to be, it''s quieter than the last one I had and is very easy to use. The drill has made my life a lot easyer. I would recommend it to to friends and family.
Well wirth the money.
da Johnny t
2016-09-12T00:00:00
I was told by a wise old machinist that the most important thing about a drill press is that there must be no lateral movement in the chuck, because if there is, it wont drill straight holes. I was concerned that this ''value'' item would not have been built well enough, but certainly My version of this has no play, and for that reason alone I would say this is a good drill and, given the price, I think it deserves five stars... Interestingly if you look around on the internet you can find this drill with at least three different manufacturers names on it. Most cost more than the Silverline - because you pay for the brand. Mine is a Silverline! I have had it for over a year and when accurate drilling is required - I use a centre drill, sharp drill bits, and hold the work piece firmly - and i have found I can drill very accurate holes in steel, brass, copper and aluminium. It''s not the quietest, and changing speed is a hassle - and I would also add that the depth ''stop'' is just two nuts on a threaded bar that tend to loosen themselves off.. which is a tad annoying- but I would have had to pay three to four times the price to see a significant jump in quality. Silverline tools in my experience are excellent value.
da Stephen W
2016-09-12T00:00:00
Great value, robust, reliable drill. Will probably outlive me!
da Oscar
2016-08-19T00:00:00
Good product at a great price. The assembly is simple and assembly instructions are very clear. The drill works perfectly. Thanks to Silverlinetools for its fantastic tools.
da Paul S
2016-08-16T00:00:00
A truly wonderful product well worth the money, easy to setup and install runs very well ,smoothly
every thing you would expect of a first class product,with excellent service including delivery.
da terry
2016-08-15T00:00:00
very happy with the drill been using it to drill metal as i do welding very easy to set up
and very easy to use no problems with it does the job very well.
and great on price.
Garanzia
Questo prodotto Silverline Trapano a colonna 350 W è garantito per un periodo di giorni dalla data di acquisto contro qualsiasi difetto di materiale o di fabbricazione. Puoi registrare il tuo prodotto 3 anni online. Un articolo difettoso sarà riparato o sostituito senza spese.
Prodotti correlati
-
441563
-
344944
-
460793
-
972660
-
263511