282415
Diamentowe wiertło rdzeniowe
€ 33.96 BEZ VAT
- Wytrzymała stalowa konstrukcja z segmentowym nasypem diamentu
- Wycina czyste i dokładne otwory w murze
- Idealny do stosowania z lub bez środka smarnego
- Do użytku z wiertarkami wyposażonymi w sprzęgło przeciążeniowe
- Do stosowania z gwintem 1/2" BSP
Dane techniczne
Wykończenie | Malowane |
Hartowane | Tak |
Tworzywo końcówki | Segment - stop z diamentu, 20 % |
Waga | 0,419 kg |
Zęby/ Rozmiar segmentu | 3 zęby - 3,57 mm x 6,97 mm x 24,04 mm |
Metoda konstrukcji | Wyciskany, frezowany, szlifowany, spiekany |
Połączenie ścierniwa | Spiekany |
Kluczowe funkcje
Wytrzymała stalowa konstrukcja z segmentowym nasypem diamentu. Wycina czyste i dokładne otwory w murze. Idealny do stosowania z lub bez środka smarnego. Do stosowania z gwintem 1/2" BSP. Do użytku z wiertarkami wyposażonymi w sprzęgło przeciążeniowe.
Zawartość pudełka
- 1 x Diamentowe wiertło rdzeniowe 42 x 150 mm
Oceny klientów
Przez David H
2019-06-16T00:00:00
Good value for cost only time will tell of the the long life of the bit.
Przez Charles F
2016-09-26T00:00:00
Needed to install a outside vent for my Daughters drier, as it was under the sink and difficult to use hammer and chisel, I looked around for a core drill, after checking the different shops and internet I decided on a core drill from SIVERLINE, as I had tools from them in the past I was not worried about the quality of it as the tools in the past where well up to specification. After ordering it , it arrived very quickly. Started the job and was amazed at the little I had to push, it went through no problem and neat, so yes this was one happy customer. PS. Idid have my own extention bar to completly get me through the wall.