380157
Przyrząd do montażu wentyli
300 mm
€ 5.46 BEZ VAT
- Pokryty tworzywem sztucznym, odporny na korozję uchwyt
- Wytrzymały 300 mm długości drążek
- Nie spowoduje uszkodzenia felgi aluminiowej
- Obrotowa końcówka z nasadką
Dane techniczne
Wykończenie rękojeści głównej | Ocynkowane / Powlekane winylem |
Hartowane | Nie |
Wykończenie | Ocynkowane / Powlekane winylem uchwyty |
Waga | 0,290 kg |
Wykończenie rękojeści dod. | Winyl |
Tworzywo kon. drugorzędnej | Winyl |
Kluczowe funkcje
Może być nakręcany na wentyle, pozwala na stosowanie dźwigni względem obręczy koła, dla prawidłowego montażu zaworu.
Zawartość pudełka
- 1 x Przyrząd do montażu wentyli 300 mm
Oceny klientów
Przez Paul K
2020-04-23T00:00:00
Having never replaced a tyre valve before, and needing to change a leaking valve on my MGF alloy wheel, I purchased the Tyre Valve Puller. After removing the old valve and manipulating the new valve lubricated with home made tyre soap into position in the rim (since I did not remove the whole tyre, just the outside bead), I attached the tool to the valve and was surprised how easily the new valve was pulled in. I did need to use a piece of wood to protect the alloy rim as the plastic sleeve was not quite long enough, but it would be fine on larger wheels. Hence my review as an essential tool, since I am not sure how I would have fitted the new valve without it.