633479
Zestaw otwornic 11 szt.
Średnica 21 - 64 mm
€ 14.60 BEZ VAT
- Zestaw zawiera: wiertło centrujące, 2 x uchwyty do otwornic oraz klucz imbusowy
- Rozmiary otwornic: 21,25, 29, 38, 44, 51 oraz 64 mm
- Maks. prędkość 1 500 obr./min
Dane techniczne
Długość trzpienia | 20 mm |
Wykończenie | Malowana otwornica, trzpień oksydowany na czarno oraz klucz sześciokątny |
Materiał ścierny | Stal wysoko węglowa |
Waga | 0,29 kg |
Zęby/ Rozmiar segmentu | 3 mm |
Zęby/ Segmenty na cal | 6TPI |
Kluczowe funkcje
Zestaw obejmuje popularne rozmiary otwornic: 21,25, 29, 38, 44, 51 oraz 64 mm, wiertło centrujące, 2 x uchwyty do otwornic oraz klucz imbusowy.
Zawartość pudełka
- 1 x Wiertło centrujące
- 7 x Otwornic (1 x 21 mm, 1 x 25 mm, 1 x 29 mm, 1 x 38 mm, 1 x 44 mm, 1 x 51 mm, 1 x 64 mm)
- 2 x Uchwyty
- Klucz sześciokątny
Oceny klientów
Przez Philip W
2022-02-03T00:00:00
Used 2 :- 60m and 25m on 5/8 ply. Cut from both sides, went through like butter.
WELL SATISFIED.
Przez B R
2019-12-07T00:00:00
Bought the holesaw set to drill a hole in a standard kitchen base unit panel to allow a washing machine waste water pipe access to the sink outlet trap. Took much longer than I anticipated to make the cut and despite constantly removing cutting debris, the cutter teeth look severely dulled. May have to utiise the Lifetime Guarantee.
Przez John g
2019-10-30T00:00:00
I found this kit easy to assemble and use
Przez Kierri W
2019-09-04T00:00:00
Excellent holesaw kit & excellent price. Made holes no problem & for a fraction of the price of other kits. The teeth are just going to dull anyway and they''re nearly impossible to sharpen - so go cheap or go home! Don''t waste money on more expensive kits, when this will do exactly the same thing. Includes two different sized arbors and several different size saws, for all your sewing needs AND its covered by a lifetime guarantee. What more could you want? Brilliant!
Przez C G
2019-07-24T00:00:00
After 4 minutes trying to dril a hole in a 1 CM tick wooden plank i gif up it was not sharp enouch to do the job
Przez Tristan G
2017-03-09T00:00:00
Haven''t used them yet but they certainly don''t look tough enough to cut metal, they don''t even seem sharp. The description on the website said stated wood & metal but the packaging mentions neither.