803634
Tarcza TCT do pilarek tarczowych 40, 60 zębów, dwupak
€ 43.32 BEZ VAT
- Do cięcia drewna, płyt wiórowych i innych materiałów kompozytowych
- Przemienne ułożenie zębów z węglików wolframu spiekanych
- 40 oraz 60 zębów
- Kąt natarcia 15°
- 30 mm otwór oraz pierścienie redukcjne 25, 20 oraz 16 mm
Dane techniczne
Średnica ostrza | 300 mm |
Kąt noża/tarczy tnącej | Kąt haka - 12° |
Rozmiar ostrza | 300 mm |
Szerokość ostrza | 300 mm |
Wykończenie | Polerowane, z powłoką odporną na rdzę |
Hartowane | Tak |
Tworzywo końcówki | Węglik wolframu |
Grubość płyty | 2 mm |
Waga | 1,885 kg |
Zęby/ Rozmiar segmentu | 8 mm, 12 mm |
Tworzywo kon. drugorzędnej | Węglik wolframu |
Metoda konstrukcji | Wytłaczane i lutowane |
Kluczowe funkcje
Nadaje się do drewna twardego oraz miękkiego, płyt wiórowych i innych materiałów kompozytowych. Utwardzone i wzmocnione do dłuższej żywotności. 1 x 40 oraz 1 x 60 zębów.
Zawartość pudełka
- 1 x Pierścień redukcyjny 20 mm
- 1 x Pierścień redukcyjny 25 mm
- 1 x Tarcza 40 T
- 1 x Tracza 60t
- 1 x Pierścień redukcyjny 16 mm
Oceny klientów
Przez Malcolm G
2019-05-05T00:00:00
I have at present I have only used the 60 teeth blade for cutting melamine surfaced board, which is always difficult with out chipping the edge.
Results are not perfect but exceptable.
Przez Antony
2017-10-10T00:00:00
Amazing value for money,and
Superb quality.
Przez Clive P
2017-07-06T00:00:00
For the price, 2 blades, can''t go wrong. The adapter rings were missing from the pack but could not see that the packaging had been opened, they were not needed anyway so did not pursue the issue. Also the picture on the ebay website showed 7000 rpm and the blades were rated 3,800 rpm.
Only 4 stars due to to the above errors.
Przez Harry B
2016-10-10T00:00:00
I have bought quite a few Silverline tools over the years, as I have found them to be good value for the quality. The lifetime guarantee is attractive, but so far I have had no need to use it. So I did not hesitate to buy these sawblades when I needed replacements for my large table saw. I have only used the one up to now, but I have given it a fair bit of stick, ripping down a load of 3 and 4 inch thick timber on my building site. I''''ve probably done several hundred metres of this, and it is still going strong and seems to be cutting as well now as it did at the start.